Pre-order: Dispatches in 7-20 days
Warning: Last items in stock!
APW3++ Power Supply is included in this package deal
QTY Hashing Chips:
QTY Hashing Boards:
DC Voltage Input:
DC Current Input @ 12V DC Input:
DC Power Input @ 12V DC Input:
Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter. You will need an ATX PSU with at least 9 six-pin PCIE connectors. There are 2 PCI-e connectors for +12V DC input on each hashing board and both need to be connected to the PSU for the hashing board to operate. Do not connect more than one PSU to the same hashing board. Bitmain recommends the APW3++ to power the L3++. Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 9 PCIE connectors are connected to power supply. All two PCI-E ports are required to power the board. You can use one PSU to power multiple boards, but do not attempt to power one board with two PSUs.We suggest to prevent the control board to be powered up before hash boards be powered up."
NO registration required!
If the question you have has not yet been answered here, use the form below to ask something about this addon.